logo
メッセージを送る
ホーム 製品電気通信のパワー系統

S5 Series ATSE 16A-630A for Telecom AC Power System

認証
中国 Tianjin Estel Electronic Science and Technology Co.,Ltd 認証
中国 Tianjin Estel Electronic Science and Technology Co.,Ltd 認証
顧客の検討
3年以前、私達の協同は非常に陽気、あなたの会社のテクニカル サポートへの感謝であり忍耐強いサービスは、エンド ユーザー冷却を用いる屋外の電気通信のキャビネットの質と非常に満足する。私達の未来の協同の幸運を祈ります。

—— アンソニー

時機を得た応答、専門技術、厳密な態度、速い配達、私達は非常に満足する、協同である非常に滑らか。

—— Manish

1つのサンプルから45セットからの76セット、200sets、私達は次第に強い信頼を確立した。キャビネットの質はよく、設計は適度である。

—— Parmar

エアコンはずっと1 1/2年間動いている。有効な冷却はよい。よい売り上げ後のサービスは、忍耐強く技術的な問題を使用し、解決するように指示し。環境モニタリング・システムはまたよく稼動して、リモート・モニタリングはキャビネット非常に便利である。

—— Luisアルベルト

箱は大きいそれと幸せな私達。私達は未来以内に30セットを毎月発注する。幸福に協力しなさい。

—— Andrej Sliachin

私達はよい提案を常に提供してもいく、解決、私達は非常に感謝しています。

—— ネルソン

オンラインです

S5 Series ATSE 16A-630A for Telecom AC Power System

S5 Series ATSE 16A-630A for Telecom AC Power System
S5 Series ATSE 16A-630A for Telecom AC Power System S5 Series ATSE 16A-630A for Telecom AC Power System S5 Series ATSE 16A-630A for Telecom AC Power System S5 Series ATSE 16A-630A for Telecom AC Power System S5 Series ATSE 16A-630A for Telecom AC Power System

大画像 :  S5 Series ATSE 16A-630A for Telecom AC Power System

商品の詳細:
Place of Origin: China
ブランド名: ESTEL
証明: CE UL FCC
Model Number: S5 Series ATSE
お支払配送条件:
最小注文数量: 1セット
価格: 715-4286 usd
パッケージの詳細: カートンケース
受渡し時間: 10日
支払条件: T/T,ウェスタン・ユニオン
供給の能力: 5000
詳細製品概要
入力頻度: 50~60Hz 外部サイズ: L*W*H 130*34*54cm
動作電圧: AC220/230V (2P),AC380/400V (3P/4P) DC出力: 122,5 VDC/97-145 VDC
作業電流 (P/3/4P): 16Aから630A DC入力: 4*80-420Vdc / 23A 最大
MPPTの電圧範囲: 120Vdcから340Vdc 仕様: 普通の
適用する: 産業用 負荷力 (W): 150
労働時間 (h): 24 Hours,10h 太陽エネルギー(w): 10
出力周波数: 50/60HZ 色: カモフラージュ
ハイライト:

S5 Series ATSE telecom power switch

,

16A-630A telecom power transfer switch

,

AC power system transfer switch

 

S5 Series Automatic Transfer Switch Equipment (ATSE) from 16A to 630A for Telecom AC Power System in L*W*H 130*34*54cm

 

Applications:

The ESTEL S5 Series Automatic Transfer Switch Equipment (ATSE) is suitable for AC power systems with a frequency of 50/60Hz, rated working voltage of AC220/230V (2P), AC380/400V (3P/4P), and a rated working current from 16A to 630A. It automatically switches one or several load circuits from one power source to another to ensure the normal power supply to the load circuits. This ATSE is suitable for important places like industrial, commercial, high-rise buildings, and residential areas.

 

Product Image :

 

     S5 Series ATSE 16A-630A for Telecom AC Power System 0           S5 Series ATSE 16A-630A for Telecom AC Power System 1

 

Operating Environment:

1.1 Surrounding Control Temperature: -5℃ ~ +40℃.

 

 

 

 

 

 

1.2 Atmospheric Conditions: The relative humidity of the air should not exceed 50% at the maximum surrounding temperature of +40°C. At lower temperatures, higher humidity is allowed. At an average lowest temperature of +25°C, the monthly average maximum relative humidity is 90%. Consideration should be given to condensation on surfaces due to temperature changes.

 

 

1.3 Altitude: The installation location should not exceed 2000m in altitude.

1.4 Pollution Level: The environmental pollution level at the installation site is Class 3.

1.5 Mounting Type: Vertical.

1.6 Installation Category: III.

 

 

Terminals and Wiring Instructions:

 

101-102: External indicator light for the status of Power Supply I, no-load signal port.

201-202: External indicator light for the status of Power Supply II, no-load signal port.

301-303: Communication ports for remote control of ATSE actions, reading switch status parameters, and fault codes.

401-402: Programmable, no-load, closed input ports. These can be defined for fire alarm linkage, prohibition of switching, or remote control. Select one of these three options. The default setting is fire alarm linkage.

403-404: Programmable, no-load, closed output ports. These can be defined for fault alarm, grid alarm, load shedding, fire feedback, or output for the two power supplies. Select one of these five options. When the selected function is triggered, the internal contact of the controller closes, outputting a signal. The default setting is fire feedback.

501-502: Default signal output port for generator start/stop. When Power Supply I is abnormal and Power Supply II has no power, internal contacts close, sending a no-load closed signal to start the generator. When the ATSE detects that Power Supply I has returned to normal, the internal contacts open, sending a generator stop signal. If the dual power supply output function is enabled, this terminal is defined as the Power Supply II abnormal output. When Power Supply II is abnormal, internal contacts close, sending an II abnormal signal.

601-602: Auxiliary power input ports. When the product requires delayed generator startup or needs remote monitoring when both power supplies are without power, a DC24V auxiliary power supply must be connected.

 

 

Inspection and Maintenance:

Pre-Power-On Inspection: After installation and wiring, it is recommended to inspect the setup to prevent errors. Check if the installation and wiring are correct, especially the main terminals like the power busbar. Ensure external signal lights are connected properly and check for short circuits. Tighten busbar screws reliably. It is recommended to disconnect the load before the first power-on adjustment. After confirming no issues, proceed with power- on testing.

 

 

 

 

連絡先の詳細
Tianjin Estel Electronic Science and Technology Co.,Ltd

コンタクトパーソン: Ms. Fiona Liang

電話番号: +8613752765943 / 86-0755 23592644

私達に直接お問い合わせを送信 (0 / 3000)