商品の詳細:
お支払配送条件:
|
Rectifier module output power: | 3000W | Power Factor: | >0.99 |
---|---|---|---|
Input Frequency: | 45~66Hz | Max. Rectifier Module Output Current: | 50A |
Module numbers: | 6 | Maximum Capacity: | 18KW(300A) |
Output type: | DC | Type: | Telecom Rectifier,telecom rectifier for switching power supply |
Efficiency: | >96% | Warranty: | 1 Year |
ハイライト: | 19インチラック 設置枠 電源,6 調整モジュールのフレーム電源,5U 高さフレーム電源 |
48Vプラグインフレーム 電力供給 5U Height 19inch Rack Installation With 6 Rectifier Module プラグインフレーム 電力供給 5U ハイート 19インチ ラック インスタレーション
C0510145 について建設
C0510145 についてフォローしているサイト
修正モジュールx 6
バッテリーブレーカー: 1×125A/1P
負荷ブレーカー
(笑)63A/1P×3,40A/1P×2,32A/1P×2
ブロンクス:16A/1P×2,10A×2,6A/1P×2 について
A rectifier systemは,交流電流 (AC) を直流 (DC) に変換し,電池を充電するために必要な電力を提供します.
ESTELの直流器は,所有コストを継続的に改善することに焦点を当て,先進的な制御および監視機能と組み合わせて,資本と運用費の両方を削減するのに役立ちます..
私たちの直流システムでは,空間と重量要件を満たしながら,優れたパワー密度を誇っています.彼らは他の機器のための部屋をたくさん残し,パッケージングと輸送コストの節約を作成します.
さらに,彼らの高効率は,総エネルギー消費を低下させ,炭素足跡を減少させます.
The embedded communication power supply system (Rectifier System) is suitable for small program-controlled switches, access networks, transmission equipment, mobile communications, and other applications. このシステムでは,小さなプログラム制御スイッチ,アクセスネットワーク,トランスミッション機器,モバイル通信などに搭載されている.
衛星通信の地上ステーション,マイクロ波通信の電源供給,および他の通信機器の電源供給にも使用できます.
通常の状況下では,リクティファイヤーモジュールと電源配送ユニットの様々なパラメータはモニタリングモジュールによって制御されます.設定されたパラメータやユーザーコマンドに従って動作します..
If the mains fails, the system will be powered by the battery at this time. If the mains fails, the system will be powered by the battery at this time. If the mains fails, the system will be powered by the battery at this time. If the mains fails, the system will be powered by the battery at this time. If the mains fails, the system will be powered by the battery at this time. If the mains fails, the system will be powered by the battery at this time. If the mains fails, the system will be powered by the battery at this time. If the mains fails, the system will be powered by the battery at this time. If the mains fails, the system will be powered by the battery at this time. If the mains fails, the system will be powered by the battery at this time. As the battery discharges, the battery terminal voltage begins to drop.
When the battery voltage is lower than the 46V dc (Alarm Value can be settable) battery low-voltage alarm point from monitor, the monitoring module reports an alarm. バッテリーの電圧が 46V dc (アラーム値が設定可能) よりも低いとき,モニタリングモジュールはアラームを報告します.
直接ロードアウトプットを閉じると,全マシンが動作しません.
C0510145 についてThe standard as table below: 標準は,以下のとおりである. 標準は,以下のとおりである.
構成 | 調整装置 | コメント |
スタンダード | GB 4943 | 詳細については,モジュールの仕様を参照してください. |
スタンダード | IEC/EN 62368-1 | |
スタンダード | EN 55032 クラスA,GR1089 発行4,R3-10,R3-11,R3-12 クラスB 北米で認定 | |
スタンダード | EN300386,CLASSA |
18KW 48VDC リクティファイヤーシステム クイック詳細:
モデル | C0510145 について | ||
システム | 尺寸 (mm) | 482.0 (W) *350.0 (D) *5U (H) | |
体重 | ≤ 15kg(直線モジュールなし) | ||
冷却モード | 自然冷却 | ||
設置モード | 19インチラックまたはキャビネット内部に設置 | ||
IPグレード | IP20 | ||
AC分布 | 入力電圧 | 380VAC 三相または220VAC 単相 | |
入力容量 | 1×63A/4P | ||
DC 配分 | 出力電圧 | -42~-58VDC,ランテッド値: -53.5VDC | |
最大容量 | 18kW ((6x3000Wの直導モジュール) | ||
バッテリーブレーカー | 2x125A/1P | ||
負荷ブレーカー |
LLVD:63A/1P×3,40A/1P×2,32A/1P×2 について |
||
DC SPD | 10kA/, 8/20μs | ||
整形器モジュール | 入力電圧 | 85VAC〜300VAC,レーテッド値:220VAC | |
効率性 | ≥96% | ||
定位電源 | 3000W ((176トン300VAC) | ||
サイズ | 106.5mm ((W) ×286mm ((D) ×41.5mm ((1U/H) | ||
冷却モード | 強制冷却 | ||
コントローラー | 信号入力 | 4 AI ((3 バッテリー temp., 1 環境 temp), 7 DI | |
アラーム出力 | 6 ドライコンタクト | ||
通信ポート | RS232/485,SNMP v2 | ||
表示モード | LCD | ||
環境 | 動作温度 | -40°C~+65°C | |
保存温度 | -40°C~+70°C | ||
動作湿度 | 5%~95% (不凝縮) | ||
高さ | 0~3000m ((高度が2000mから3000mの範囲内であれば,高度が200m増加すると最大動作温度が1°C減少します.) |
製品の特徴
1) The rectifier module adopts active power factor compensation technology, and the power factor value reaches 0. 1) The rectifier module adopts active power factor compensation technology, and the power factor value reaches 0. 1) The rectifier module adopts active power factor compensation technology, and the power factor value reaches 0. 1) The rectifier module adopts active power factor compensation technology, and the power factor value reaches 0. 1) 動力因子補償技術を採用した電源メーカーの電源因子補償技術を採用した電源因子の値が0に達すると,電源因子の値が0に達すると99.
2) AC入力電圧の通常の作業範囲は,90~290V,シングルフェーズ (323V~480V ac,3フェーズ) まで広い.
3) The rectifier module adopts full-bridge soft-switching technology, and the efficiency is up to 96%. このモジュールは,フルブリッジのソフトスイッチング技術を採用しており,効率は96%まで上がっています.
There are load power-off and battery low-voltage protection (LVLD+LVBD) and secondary power-off (secondary power switch) functions. バッテリーに負荷電源オフとバッテリー低電圧保護 (LVLD+LVBD) と次要電源オフ (次要電源スイッチ) の機能がある.
温度補償,自動均衡,浮動充電制御,自動電圧調節,バッテリー容量計算などの機能を実現できるそしてオンラインバッテリーテスト.
5) The rectifier module adopts non-damage hot-swappable technology, plug and play, and the replacement time is less than 1min. 5. The rectifier module adopts non-damage hot-swappable technology, plug and play, and the replacement time is less than 1min. 5. The rectifier module adopts non-damage hot-swappable technology, plug and play, and the replacement time is less than 1min. 5. ストレティフィアモジュールは,無害のホットスワッパブル技術,プラグアンドプレイを採用しており,その交換時間は1分未満です.
6) ネットワークデザイン,複数の通信インターフェイス (RS485などの) を提供し,柔軟なネットワーク,リアル-限定ローカルおよびリモートモニタリング,無所属.
7) ACとDCサイドのための雷保護設計,雷雨地域に適しています.
8) 障害保護と障害アラーム機能をサポートする.
9) Friendly operation and maintenance can be installed against the wall, effectively saving space. (9) フレンドリーな操作と保守は壁に設置され,スペースを効果的に節約できます.
10) 超低放射線.先進的な電磁互換性設計を採用する.
システムロジック構成
製品写真:
調整装置のモジュールの寸法:
隔熱能力 | ||
パラメーター | スタンダード | コメント |
隔熱強度 (AC入力) | 入力出力:3500Vdc/10mA//1分 |
フラッシュオーバーや障害はない 試験前には放出管/電波防護装置を外す.直すモジュールやモニタリングモジュールがない. 2つの路線による出力 低電圧端子,高電圧端子,交流バイパス機能,試験対象ではない. |
入力室:3500Vdc/10mA//1分 | ||
出力室:750Vdc/10mA//1分 | ||
隔熱強度 (DC入力) | 入力出力:750Vdc/10mA//1分 | |
入力室:750Vdc/10mA//1分 | ||
出力室:750Vdc/10mA//1分 | ||
流出電流 | ≤3.5mA | 280Vac入力,出力フルロード |
断熱抵抗 | @ 普通の空気,相対湿度90% DC 500V の試験電圧,入力-出力,入力-地,出力-地の隔離抵抗は10MΩ未満でなければならない.2つのルートで出力 低電圧端末ACバイパス機能を持つ高電圧は,試験されません. |
適用する
(1) 統合へのアクセス
(2) 室内配送及び拡張システム
(3) モバイルステーションと延長カバーシステム
(4) WLAN
(5) 衛星通信の地面駅とマイクロ波通信駅
(6) 弱電流配送室
(7) 他のAC/DC不中断電源システム
強制冷却 |
コンタクトパーソン: Ms. Fiona Liang
電話番号: +8613752765943 / 86-0755 23592644